Algaecide 60


1 qt.

Concentrated Poly-Algaecide formula is non-metallic and non-foaming. Destroys and prevents many strains of algae.

This product is used to control the growth of algae in swimming pools, outdoor spas, and hot tubs. For maximum effectiveness pools, spas, and hot tubs containing a heavy growth of algae should be cleaned prior to using this product.

For pools containing visible algae growth add an initial dose of 11 to 17 fluid ounces of this product per 10,000 gallons of water and remove settled algae debris by cleaning. For treatment of a freshly cleaned and filled pool add initially 6 to 11 fluid ounces of this product per 10,000 gallons of water. Subsequent additions of 2 to 4 fluid ounces of this product per 10,000 gallons of water should be made every 5 to 7 days after initial treatment for maintenance.

This product will prevent growth of most algae during the off-season winter months when pools are not in use. For pools which have been properly treated during the swimming season and are free of visible algae, add 8 to 10 fluid ounces of algaecide per 10,000 gallons of water. If at the end of swimming season pools have some visible algae growth, add 12 to 17 fluid ounces per 10,000 gallons. It is necessary that a uniform distribution of algaecide throughout the water and the pool be made for maximum effectiveness. If pool is not covered, it may be necessary to repeat the treatment one or more times during the season.

This product is compatible with chemicals normally used to treat pools and spas and is effective at both acid and alkaline pH. This product can be used in pools and spas treated with chlorine chemicals and may reduce the amount of those chemicals normally required.

MSDS Sheets (pdf)